This Lightbar has 16 light modules containing 48 high intensity OSRAM LED's, mounted in wide angle optics.
This model is available with either clear or coloured lenses and comes with a 3M cable tail. It is dual voltage, in fact it will operate on any voltage between 11-30 volts DC.
The Lightbar is fitted with low profile (25mm) bolt -on mounting feet.
The dimensions are: 31.5'' long x 12'' wide x 2.2'' high, or 80 x 30.3 x 5.4 in CM.
Mega-Flash lightbars now have 6 flash patterns that alternate left and right and these are:
1. Single
2. Double
3. Triple
4. Quad
5. Mega-Flash
6. Hyper-Flash
The lightbar can be operated at either low or high power. In the low power mode, each LED will be operating at 1 watt. In the high power setting, each LED operates at 3 watts. In low power the current load will be less than 4 amps, or at high power where the current draw will increase to around 6 watts, depending on the flasf pattern being used.
The schematic diagram below shows the layout of the light modules.
Like all Mega-Flash products this lightbar is e marked which makes it legal to use on the road.
The product comes with a 2 year warranty on the unit, and a 5 year warranty on the LED's.