82'' LED Lightbar ECO Model

This Lightbar has 16 light modules containing 48 high intensity OSRAM LED's, mounted in wide angle optics.

This model is available with either clear or coloured lenses and comes with a 3M cable tail. It is dual voltage, in fact it will operate on any voltage between 11-30 volts DC.

The Lightbar is fitted with low profile (25mm) bolt -on mounting feet.

The dimensions are: 82'' long x 12'' wide x 2.2'' high, or 208 x 30.3 x 5.4 in CM.

Mega-Flash lightbars now have 6 flash patterns that alternate left and right and these are:

1. Single

2. Double

3. Triple

4. Quad

5. Mega-Flash

6. Hyper-Flash

The lightbar can be operated at either low or high power. In the low power mode, each LED will be operating at 1 watt. In the high power setting, each LED operates at 3 watts. In low power the current load will be less than 4 amps, or at high power where the current draw will increase to around 6 amps, depending on the flash pattern being used.

The schematic diagram below shows the layout of the light modules.