Haztec Impact LP Beacon Amber LEDs Mag Mount

£182.71 inc Vat

Manufactured to Order – Can take 7-10 working days for manufacture. FREE Delivery to a UK Mainland Address.

SKU: 3-3541-EA-M Category:

Full 5 Year Manufacturer Warranty. ✓      100% Designed and Manufactured in the UK. ✓      Secure online shopping. ✓

Haztec Impact LP Gen3, 12 LED Ultra-Bright Amber LED Beacon magnetic Mount 12V-24V (10-40V).

Clear Dome, Amber LEDs. 3M long Straight Power Lead with On/Off and Flash Pattern Select.

5 year warranty. 

34kgs Magnetic mount amber + full base rubber cover c/w lead & switched plug.

Impact LP Gen3 ECE R65 12 LED Amber Ultra-Bright Beacon. Amber LEDs, Clear Dome.
Magnetic Mount.
Built-in Selectable Flash Patterns
Synchronisation and Night Dim Options
E11 EC65 Certification (Blue)
12-24V (10-40V)

As well as being certified to EC65 (Amber Class 1 and Blue Class 2),  Magnetic Mount Impact LP LED Beacons have also been independently wind tested to 250km/h (155MPH).

The beacon now features a new enhanced full base protective cover to protect the vehicle paintwork and the magnet.

Magnetic mount LP beacons are supplied with a cigar plug lead and adaptor. The adaptor features a single rocker switch as standard for simple on / off switching, a second momentary switch can also be specified to allow the user to change the flash pattern as required.

WARNING

The use of any magnetically or magnetic/vacuum mounted warning device on the outside of a
vehicle in motion is not recommended and is at the sole risk and responsibility of the user.
Before using a magnetic or vacuum mount beacon on a moving vehicle the following factors noted
below should be considered. Each factor will to varying degrees contribute to the magnetic/vacuum
adhesion being lost and the beacon becoming detached from the vehicle posing a risk to other road
users.

■ The higher the speed that the vehicle is travelling the greater the force that will be exerted on the
beacon.
■ Headwinds, crosswinds, turbulence from other vehicles and forces exerted when cornering, braking
or accelerating may exert sudden unpredictable forces on the beacon.
■ The surface condition of the vehicle roof due to the presence of water, ice or road contamination will
compromise suction and reduce magnetic adhesion and will act as a lubricant that may cause the
beacon to move.
■ The use of rubber or neoprene magnet caps to prevent scratching of the vehicle roof will reduce the
magnetic adhesion force.
■ The thinner the gauge of metal used in the manufacture of the vehicle, the lower the magnetic
clamping force available.

Magnetic Mount Beacons
These magnetic beacons are intended for temporary use and need to be further secured with the use of a fixed lanyard.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart